畢業論文

打賞
當前位置: 畢業論文 > 機械論文 >

氣動元件分揀系統的設計+CAD圖紙

時間:2019-06-29 14:43來源:畢業論文
設計一個能自動分揀直徑小于等于30mm,高度不大于15mm,質量不大于100克的塑料瓶蓋的氣動系統,要求瓶蓋能按特定的順序(瓶蓋口向上或瓶蓋口向下)移送到指定的位置(旋蓋機)

摘要:自動分揀系統是先進配送中心所必需的設施條件之一。它具有很高的分揀效率,通常每小時可分揀商品6000-12000箱;可以說自動分揀機是提高物流配送效率的一項關健因素。它是二次大戰后在美國、日本的物流中心中廣泛采用的一種自動分揀系統,該系統目前已經成為發達國家大中型物流中心不可缺少的一部分。36744
自動分揀機是自動分揀系統的一個主要設備。它本身需要建設短則40-50米,長則150-200米的機械傳輸線,還有配套的機電一體化控制系統計算機網絡通信系統等,這一系統不僅占地面積大,而且還要建3-4層樓高的立體倉庫和各種自動化的搬運設施(如叉車)與之相匹配,這項巨額的先期投入通常需要花10-20年才能收回。
本文所設計的分揀系統是針對塑料瓶蓋的分揀系統。本次課程設計的主要內容是設計一個能自動分揀直徑小于等于30mm,高度不大于15mm,質量不大于100克的塑料瓶蓋的氣動系統,要求瓶蓋能按特定的順序(瓶蓋口向上或瓶蓋口向下)移送到指定的位置(旋蓋機),對不滿足要求的瓶蓋能使其重新回到料筒。
畢業論文關鍵詞:分揀,氣動,減速箱,舌行板
Design of pneumatic component sorting system
Abstract: Automatic sorting system is one of the necessary facilities for the advanced distribution center.. It has a very high sorting efficiency, usually can be sorted 6000-12000 box every hour, can be said that the automatic sorting machine is a key factor to improve the efficiency of logistics distribution. It is after the Second World War in the United States, Japan, the logistics center is widely used in the automatic sorting system, the system has become developed countries large and medium-sized logistics center is an indispensable part of. 源`自!六^維"論^文;網www.aftnzs.live
Automatic sorting machine is a main equipment of automatic sorting system.. It requires short construction is 40-50 meters, long 150-200 meters of mechanical transmission lines and supporting electromechanical integration control system, computer network and communication system, etc., this system not only covers an area of large area, but also to build 3-4 storeys high warehouse and a variety of automated handling facilities (such as forklift) and the matching, the huge initial investment, usually need to spend 10-20 years to recover.
The sorting system designed in this paper is the sorting system for plastic caps.
The main content of the curriculum design is design a to automatic sorting diameter is less than or equal to 30 mm, the height is not more than 15mm, quality is not greater than 100 grams of plastic bottle of gas dynamic system, the requirements of bottle cap according to the specific sequence (caps to or bottle mouth downward) transferred to the specified location (capping machine) can be, does not meet the requirements of bottle cap can make it back to the barrel.
Keywords: sorting, pneumatic, reducer, tongue Andante
目錄
1.緒論    6
1.1自動分揀機的簡介    6
1.2自動分揀機的種類    6
1.2.1擋板式分揀機    6
1.2.2浮出式分揀機    7
1.2.3滑塊式分揀機    8
1.2.4傾斜式分揀機    8
1.2.5托盤式分揀機    10
1.3課程設計的技術要求:    11
1.4課題的設計背景及意義    11
2.塑料瓶蓋分揀系統方案擬定    12
2.1各種傳動方式的特點    12
2.1.1機械傳動    12
2.1.2電氣傳動    12
2.2出蓋方式    12
2.2.1通過離心力的作用實現出蓋    12 源`自!六^維"論^文;網www.aftnzs.live
2.2.2通過振動形式實現出蓋    12
2.3理蓋方式    13 氣動元件分揀系統的設計+CAD圖紙:http://www.aftnzs.live/jixie/20190629/35313.html
------分隔線----------------------------
推薦內容
双色球走势图带连线