畢業論文

打賞
當前位置: 畢業論文 > 土木工程 >

南京市體校三層食堂建筑與結構設計+CAD圖紙

時間:2019-05-31 22:35來源:畢業論文
南京市體校食堂的建筑結構設計。主體建筑共3層,采用框架結構體系,首層層高4.2m,標準層層高3.9m,總建筑總面積約5000m2。設計內容包含建筑設計和結構設計兩部分

摘要:本次畢業設計的主要任務為南京市體校食堂的建筑結構設計。主體建筑共3層,采用框架結構體系,首層層高4.2m,標準層層高3.9m,總建筑總面積約5000m2。設計內容包含建筑設計和結構設計兩部分。建筑設計部分主要依據任務書基本要求進行平面、立面、剖面設計,并繪制建筑施工圖。結構設計部分,主要采用電算為主、手算為輔的方式,注重概念設計能力培養,具體通過PKPM, 軟件建立多層框架計算模型,結合SATWE 模塊進行結構內力分析,并在保證結構安全、經濟、合理的前提下,對初選的結構布置方案進行優化設計。同時對樓板、次梁、樓梯、一榀框架、基礎進行手算設計,以強化基礎設計能力,最終完成結構施工圖的繪制。35816
畢業論文關鍵詞:混凝土;框架結構;建筑設計;結構設計;PKPM                
Architectural and structural design of Nanjing Sport Institute’s canteen
Abstract: This graduation thesis focuses on the architectural and structural design of a canteen of Nanjing Sport Institute. The building, which adopts the frame structure, has three stories, with a height of 4.2 meter for the first story and 3.9m for the other two. The total architectural area is about 5000 square meters. The thesis consists of two parts: architectural design and structural design. Architectural design, which is based on the requirements of assignments, includes several parts in detail, that is, plane design, elevation and section design, and corresponding construction drawing. As for the structural design, professional software-aided design method is mainly used with some manual calculations, emphasizing on training the structural concept design ability. With the help of PKPM and SATWE module, a multi-storey frame model is established and the internal force is analyzed. Given factors such as safety, economy and rationality, the original structural system is optimized. Besides, manual design for a slab, a secondary beam, a frame structure, stairs and foundations are also carried out, training the basic design ability. Finally, the structure shop drawing is completed with AutoCAD.

源¥自%六:維;論-文'網=www.aftnzs.live


Key words: reinforced concrete; frame structure; architectural design; structural design; PKPM
目  錄
0H1 引言    55H1
1H2 建筑設計    56H2
2H2.1 設計依據    57H2
3H2.2 工程概況    58H2
4H2.3 建筑設計    59H2
5H2.3.1 食堂大廳    60H2
6H2.3.2 衛生間    61H3
7H2.3.3 樓梯    62H3
8H2.4 主要建筑做法    63H3
9H2.4.1 屋蓋做法    64H3
10H2.4.2 樓蓋做法    65H3
11H2.4.3 外墻面做法    66H3
12H2.5 室外工程    67H4
13H2.5.1 室外臺階做法    68H4
14H2.5.2 室外坡道做法    69H4
15H2.5.3 散水做法    70H4
16H2.5.4 其它    71H4
17H2.6 門窗工程    72H4
18H2.7 建筑施工圖    73H4
19H3 結構設計    74H7
20H3.1 結構設計說明及設計資料    75H7
21H3.1.1 設計依據    76H7
22H3.1.2 自然條件    77H7
23H3.1.3活荷載標準值    78H7
24H3.1.4 地質條件    79H7
25H3.1.5 主要結構材料    80H8
26H3.2 結構選型和布置    81H8
27H3.2.1 結構方案的選擇    82H8
28H3.2.2 結構平面布置    83H8
29H3.2.3 板、梁、柱截面形式和尺寸估算    84H8
30H3.3荷載計算    85H10 南京市體校三層食堂建筑與結構設計+CAD圖紙:http://www.aftnzs.live/gongcheng/20190531/33941.html
------分隔線----------------------------
推薦內容
双色球走势图带连线